Emergency gloves for rescuers

Miwa 6507

Extremely durable gloves for firefighting work. The back is protected by a robust reinforcement system protecting not only the knuckles, but also the joints of the fingers.

Upper material:

Back: Durable elastic fabric, Lime Green color.
Palm: DuPontTM Kevlar®/Polyamide with FR coating and foam padding in palm area. Extremely resistant to mechanical risks.

Reinforcement:

Reinforcement of the most exposed areas on the back protects against abrasion and impact – Kevlar®/Polyamide with FR coating and foam padding.
Reinforcement between the thumb and forefinger made of Kevlar®/Polyamide fabric with FR coating covers the side seams, increasing the glove's life thanks to its high resistance to abrasion.

Lining:

Palm and back: Kevlar®/Polyester/fiberglass knit lining – high cut resistance.

Cuff:

Evo – Elastic cuff finished with an elastic band to prevent dirt from getting stuck.

Other Information:

High resistance to mechanical risks in the palm and on the back.
High strength.
Comfortable cut.
The wrist part is tightened with an elastic band.
Metal ring for hanging the glove on a carabiner.
Reflective element.
Contrast stitching.
Washable at 60 °C.

Standards:

EN 420:2003+A1:2009
EN 388:2003

DuPont™ and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.

Size:

6-7-8-9-10-11-12

Care & Maintence

Choose a more ecological short washing program at 40 °C. Wash at a maximum temperature of 60°C if you need to disinfect the gloves or they are extremely dirty.

Procedure

Remove coarse dirt after each use.
Before washing, fasten the Velcro fasteners and remove the snaps.
Use a liquid detergent. Wash on a short programme.
To make the glove fit better: Shape the glove several times after washing and during drying.
Do not dry in direct sunlight or heat sources, do not use a tumble dryer.
Store the gloves in a dry environment.

Recommended use:

Washing Gel

Washing gel is natural based for leather and textile gloves with high washing efficiency.
It reduces bacteria, does not pollute the environment and is fully biodegradable.

Holík impregnation

Highly effective impregnating spray for leather and textiles. The fluorocarbon based impregnation adds water repellency, oil repellency and anti-chafing to the face of the glove while leaving the product breathable. The impregnation is applied to the dry product in a thin layer and allowed to dry for a minimum of 12 hours.

Want to know more about our washing and maintenance project?
Visit this site:

Care&Maintenance

Related products

Kashi

Gloves for technical interventions with anti-slash lining in the back and palm. This all-textile model can be washed at up to 60°, allowing a greater degree of disinfection.