Emergency gloves for rescuers
KASHI FR 8275-01
Technical protective gloves against mechanical and thermal risks. This model has added protection on the back of the user's hand, thanks to the placement of a protective lining in this area. The gloves are hydrophobic, oleophobic, and the user's comfort is ensured by a sophisticated anatomical cut with overstretched seams on the fingertips.
Description
Upper material:
- Back: Resistant textile with reduced flammability with hydrophobic and oleophobic treatment.
- Palm and interstitial: Elastic Para-aramid/Polyamide knit with silicone coating.
Reinforcement:
- Protection of the knuckles on the back of the hand against abrasion and impact - Kevlar®/Polyamide with FR coating backed with foam.
- The reinforcement between the thumb and index finger made of Kevlar® fabric with FR coating overlaps the side seams, thanks to the high resistance to abrasion increases the durability of the glove.
Lining:
- Palm and back: Para-aramid / Polyester / fiberglass knit lining - high cut resistance.
- Cuff: Non-flammable inner FR knitted material preventing the penetration of dirt into the glove.
Cut resistant intermediate layer:
- Palm: 100% aramid non-woven fabric.
Cuff:
- Evo – Elastic cuff finished with a rubber band against dirt.
Other informations:
- Anatomic cut.
- All-over non-flammable glove.
- Highly hydrophobic and oleophobic.
- High resistance to mechanical risks in the palm and on the back.
- Above average mechanical resistance in the interfingers.
- Breathability, sensitivity and flexibility.
- Excellent grip and sensitivity thanks to the special design of the extended fingertips.
- High-vis, reflective element on the back of the glove.
- Comfortable - flexible - anatomically shaped cut including the thumb.
- The wrist part is tightened with an elastic band.
- Non-flammable loop on the cuff for easier putting on the glove and for hanging on a carabiner.
- The gloves can be washed at 60 °C.
Standards:
- EN 388:2016+A1:2018
- EN 407:2020
- EN ISO 21420:2021
- Tested:
Hydrophobicity – EN ISO 4920, ISO 5 (highest)
Back cut - EN 388, 6.2; value level 3
DuPont™ and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.
Size:
6-7-8-9-10-11-12
Technologies
Care & Maintence
Choose a more ecological short washing program at 40 °C. Wash at a maximum temperature of 60°C if you need to disinfect the gloves or they are extremely dirty.
Procedure
Remove coarse dirt after each use.
Before washing, fasten the Velcro fasteners and remove the snaps.
Use a liquid detergent. Wash on a short programme.
To make the glove fit better: Shape the glove several times after washing and during drying.
Do not dry in direct sunlight or heat sources, do not use a tumble dryer.
Store the gloves in a dry environment.
Recommended use:
Washing Gel
Washing gel is natural based for leather and textile gloves with high washing efficiency.
It reduces bacteria, does not pollute the environment and is fully biodegradable.
Holík impregnation
Highly effective impregnating spray for leather and textiles. The fluorocarbon based impregnation adds water repellency, oil repellency and anti-chafing to the face of the glove while leaving the product breathable. The impregnation is applied to the dry product in a thin layer and allowed to dry for a minimum of 12 hours.
Want to know more about our washing and maintenance project?
Visit this site:
Care&Maintenance
Related products
Kashi
Gloves for technical interventions with anti-slash lining in the back and palm. This all-textile model can be washed at up to 60°, allowing a greater degree of disinfection.
Lesley Plus
Versatile glove for technical interventions. This model excels in flexibility, sensitivity and high protection against mechanical risks.
Miwa
Extremely durable gloves for firefighting work. The back is protected by a robust reinforcement system protecting not only the knuckles, but also the joints of the fingers.
Inquiry form
Thank you for your interest. We will contact you as soon as possible.
