Protective gloves for firefighters
DIAMOND Long 8111-04
A very popular textile gloves with ceramic coating and anti-shock filling. The high durability is completed by compliance with EN 659 even after a series of 40 washing cycles.
Description
Upper material:
- Back: Nomex® fabric with hydrophobic and oleophobic treatment, reinforced with ceramic coating in exposed areas.
- Palm: Meta-aramid / Para-aramid knit with silicone coating.
Reinforcement:
- Back knuckles are protected against impact by impact-resistant foam placed in the inner layers of the glove. Ceramic coating increases abrasion resistance on both the fingers and the back reinforcement.
- Ceramic coating: The fingertips are no longer protected by reinforcements but by ceramic coating, making this area more flexible without reducing protection. This technology reduces weight and increases glove sensitivity.
Intermediate layers:
- Insulation layer – Recycled aramid non-woven fabric.
- Membrane – FR membrane Porelle®.
Lining:
- Aramid lining.
Cuffs:
- Flexi – Cuff made of flame-retardant knit with stable internal elasticity.
- Evo – Cuff made of Nomex® fabric with additional internal knitted cuff.
- Easy – Cuff made of Nomex® fabric.
- Long – Extended cuff made of Nomex® fabric with velcro closure.
- Short – Basic cuff made of Para-Aramid knitting.
Other information:
- Anatomical cut of the glove.
- Reflective elements, high-visible meta-aramid sewing threads.
- Carabiner for hanging gloves to clothing.
- The gloves complies with EN 659 even after 40 washing cycles at 60 °C.
- Available in beige, red and navy.
Standards:
- EN 659:2003+A1:2008
Size:
5-6-7-8-9-10-11-12-13
Measurement test results:
| Measurement type: | Results before washing: | Results after washing: |
| Abrasion resistance | 4 | 4 |
| Blade cut resistance (palm part) | 5 | TDM Level E |
| Tear resistance | 4 | 3 |
| Puncture resistance | 3 | 3 |
| Burning behaviour | 4 | 4 |
| Convection heat resistance | 4 | 4 |
| Radiant heat resistance | 2 | 2 |
| Contact heat resistance | 2 | 2 |
| Dexterity | 5 | 5 |
DuPont™, Kevlar® and Nomex® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.
Technologies
Care & Maintenance
Choose a more ecological short washing program at 40 °C. Wash at a maximum temperature of 60 °C if you need to disinfect the gloves or they are extremely dirty.
Procedure
Remove coarse dirt after each use.
Before washing, fasten the Velcro fasteners and remove the snaps.
Use a liquid detergent. Wash on a short programme.
To make the glove fit better: Shape the glove several times after washing and during drying.
Do not dry in direct sunlight or heat sources, do not use a tumble dryer.
Store the gloves in a dry environment.
Recommended use:
Washing Gel
Washing gel is natural based for leather and textile gloves with high washing efficiency.
It reduces bacteria, does not pollute the environment and is fully biodegradable.
Holík impregnation
Highly effective impregnating spray for leather and textiles. The fluorocarbon based impregnation adds water repellency, oil repellency and anti-chafing to the face of the glove while leaving the product breathable. The impregnation is applied to the dry product in a thin layer and allowed to dry for a minimum of 12 hours.
Want to know more about washing and maintenance ?
Care&Maintenance
Related products
SensPro®
A technologically unique intervention gloves with implemented SensPro® sensors designed to monitor ambient temperature of distant objects.
Angel Evo
Protective textile glove with extremely durable PBI® fibre. In addition, the glove has a ceramic coating on exposed areas for increased abrasion resistance.
CRYSTAL Evo
The gloves with sophisticated reinforcement system for better mechanical and thermal resistance. In addition, the nomex fabric is ceramic coated in exposed areas for increased abrasion resistance.
Inquiry form
Thank you for your interest. We will contact you as soon as possible.