Protective gloves for firefighters
BRELA Easy 8115-03
The basic model of our collection of all-textile gloves is characterized by high sensitivity and flexibility. The back knuckles are protected against impact by anti-shock foam placed in the inner layers of the glove.
Description
Upper material:
- Back: Kermel.
- Palm: Meta-aramid/Para-aramid knit with silicone coating.
Intermediate layer:
- Insulation layer – Recycled aramid non-woven fabric.
- Membrane – PU membrane.
Lining:
- Aramid lining.
Other Information:
- Anatomical cut glove.
- Reflective elements.
- Carabiner for hanging the gloves to the garment.
Standards:
- EN 659:2003+A1:2008
Size:
- 7 - 8 - 9 - 10 - 11 - 12
Measurement test results:
| Measurement type: | Results before washing: |
| Abrasion resistance | 4 |
| Blade cut resistance (palm part) | 5 |
| Tear resistance | 4 |
| Puncture resistance | 3 |
| Burning behaviour | 4 |
| Convection heat resistance | 4 |
| Radiant heat resistance | 2 |
| Contact heat resistance | 2 |
| Dexterity | 5 |
DuPont™, Kevlar® and Nomex® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.
Technologies
Care & Maintence
Choose a more ecological short washing program at 40 °C. Wash at a maximum temperature of 60°C if you need to disinfect the gloves or they are extremely dirty.
Procedure
Remove coarse dirt after each use.
Before washing, fasten the Velcro fasteners and remove the snaps.
Use a liquid detergent. Wash on a short programme.
To make the glove fit better: Shape the glove several times after washing and during drying.
Do not dry in direct sunlight or heat sources, do not use a tumble dryer.
Store the gloves in a dry environment.
Recommended use:
Washing Gel
Washing gel is natural based for leather and textile gloves with high washing efficiency.
It reduces bacteria, does not pollute the environment and is fully biodegradable.
Holík impregnation
Highly effective impregnating spray for leather and textiles. The fluorocarbon based impregnation adds water repellency, oil repellency and anti-chafing to the face of the glove while leaving the product breathable. The impregnation is applied to the dry product in a thin layer and allowed to dry for a minimum of 12 hours.
Want to know more about our washing and maintenance project?
Visit this site:
Care&Maintenance
Related products
DIAMOND Flexi
A very popular textile gloves with ceramic coating and anti-shock filling. The high durability is completed by compliance with EN 659 even after a series of 40 washing cycles.
Inquiry form
Thank you for your interest. We will contact you as soon as possible.
