EN

Back

Firra TX B702-56

Low-cut firefighter boots at the lower end of category "C", equipped with Holík’s special technologies that radically increase all-day comfort and wearability – all while maintaining maximum safety, extreme performance, and distinctive design. Developed in cooperation with firefighters and tested by firefighters.

Membrane

Description

Material:

  • Full-grain cowhide leather 2.2 - 2.4 mm with hydrophobic treatment combined with functional flame-resistant textile 

Membrane:

  • PU membrane.

Upper material:

  • Full-grain cowhide leather 2.2 - 2.4 mm with hydrophobic treatment combined with functional flame-resistant textile 
  • Option of a full-leather version, without textile combination (model Firra LT B702-19).
  • Ankle protection – integrated into the inner construction of the upper for greater comfort.
  • Reflective elements placed on the upper so they remain visible and effective even when wearing turnout gear.
  • GRIP System – large loops at the top of the boots for easy donning and comfortable handling even when wearing gloves, enhanced with a reflective element.
  • The entire upper is padded to increase user comfort.
  • The top edge is folded and padded to prevent pressure marks and chafing.
  • The front, side, and rear parts of the boot in the flex zones are padded and made of flexible leather/textile, providing higher comfort in use while ensuring maximum protection.
  • High resistance to radiant heat.

Lining:

  • PU membrane & 4-layer lining.
  • Provides high abrasion resistance and maximum breathability in both versions.

Toe cap:

  • NANO composite toe cap, made of multiple layers of laminated fiberglass fabric coated with a resin paste containing modified carbon nanotubes. It is lightweight and exceptionally impact-resistant.

Toe protection:

  • Protective rubber toe guard, heat-resistant up to 250°C.
  • Two-tone design.

Heel protection:

  • Rubber heel guard with ribs for comfortable and quick removal.
  • Two-tone design (the model is also available without the rubber component).

Antiperforation insole:

  • Composite textiles with puncture-resistant technology.
  • Puncture resistance for PL (Puncture resistance, Laminated sole) and PS (Puncture resistance, Steel sole).

Removable inner sole:

AdaptFIT Insole Technology with interchangeable insoles. Three types of standard anatomical insoles are available:

  • Type 1: Insole for high instep. Thinnest. Material: 600 g felt, KNITOX (99% polyester, 1% carbon fiber).
  • Type 2: Insole for medium instep (standard insole). 5.5 mm PolyEVAc wedge. Material: 600 g felt, LATEX Memory, KNITOX (99% polyester, 1% carbon fiber).
  • Type 3: Insole for low instep. 6.5 mm PolyEVAc wedge. Thickest. Material: 600 g felt, LATEX Memory, KNITOX (99% polyester, 1% carbon fiber).

Sole EXPLORER:

  • specially developed Holik's EXPLORER rubber sole
  • Zones with special tread pattern & self-cleaning design
  • Antistatic, slip-resistant, resistant to oils, acids & fuels
  • Heat resistant up to 250 °C
  • Shock absorber in the heel area integrated into the sole

Other information:

  • Waterproof footwear – tested for 500,000 bending cycles
  • Water column – 2 cm from the end of the sole
  • TwinGuard – heel and toe protection enhanced with ribs for easier removal
  • QuickZIP – combination of large loops (GRIP System) and zipper allows very fast donning for minimal reaction time
  • HEEL Lock System – locks the foot in the shoe even if fastenings are not fully closed; the shoe design ensures the upper fits the heel and secures the foot and shoe as a whole
  • ErgoFit PRO - The softened upper, padded edges, and vulcanized ankle support prevent chafing, swelling, and blisters. The footwear provides the highest possible comfort while maintaining maximum protection.

TrueFOOT last

  • Thanks to the proprietary TrueFOOT comfort last – a three-dimensional form that defines the shape of the footwear based on anthropometric measurements and systematic research – the shoe design responds to the physiological needs of the wearer’s foot.
  • Very comfortable and stable sole – the last was developed based on measurements of firefighters’ feet, providing sufficient width in the toe and toe joint areas.
  • Provides ample space in the toe and heel areas. This design ensures proper blood circulation in the foot, helping to prevent coldness or foot deformation.

Standards:

  • EN 15090:2012
  • EN ISO 20345:2023 (EN ISO 20345:2022)
  • Certification for orthopedic insoles complying with DGUV 112-191

Shoe features:

  • F2A – Firefighter's footwear type 2
  • HI3 – Heat insulation
  • WR – Water Resistance
  • SRC – Anti-slip properties
  • P – Puncture resistance
  • T – Impact resistance
  • AN – Ankle protection
  • A – Antistatic footwear
  • CI – Cold insulation
  • HRO – Contact Heat Resistance
  • FO – Oil resistance
  • SC – Scuff Cap
  • LG – Ladder Grip

DGUV Regel 112-191

  • Compatibility with Novaped orthopedic insoles – meets the requirements of DGUV 112-191
  • The footwear is compatible with and certified for the Schein® system according to DGUV 112-191.
  • Holik International company is the supplier of Schein orthopedic components.

Sizes:

  • EU: 35 - 53

 

DuPont™, Kevlar® and Nomex® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.

Technologies

Download

Care & Maintenance

We recommend cleaning both textile and leather parts by hand using products suitable for the maintenance and decontamination of firefighting boots, such as F5 detergent or F15 active cleaning foam. These products will ensure high-quality cleaning of medium to heavy soiling of footwear after use without damaging the color and hydrophobic properties of the textile and leather parts of the footwear.

 

INSTRUCTIONS FOR CLEANING AND MAINTENANCE OF HOLÍK BOOTS

Removing components:

  • When disassembling components, take care not to contaminate the surrounding area (objects and people).
  • Always use appropriate disposable personal protective equipment (PPE), such as face masks and gloves.
  • Ensure that you have the correct containers or bags ready to collect contaminated items. This will help prevent the spread of contamination to surrounding areas or objects.
  • Be careful of everything you touch when handling potentially contaminated equipment. If accidental contamination occurs, immediately and thoroughly decontaminate the affected area.

 

Preparation for the cleaning process:

  • Prepare a coarse brush for heavy dirt, a cleaning brush for foam cleaning, a container for cleaning solution, cleaning solution, disinfectant solution, HOLÍK IMPREGNATION SPRAY, and HOLÍK EMULSION.
  • Make sure your room is well ventilated.
  • Put on personal protective equipment to protect yourself from contamination.

 

Cleaning process:

  • Unlace and unfasten your shoes as much as possible.
  • Remove heavy dirt from your shoes with a brush and water.
  • Prepare the F15 cleaning solution in the prepared container. Follow the instructions on the packaging. Make sure the solution is well foamed.
  • Spray the prepared solution onto the outside and inside of the shoes, spot by spot.
  • Leave the foam to work for 15 minutes.
  • After this time, clean the sprayed areas with a brush.
  • Rinse the shoes thoroughly with warm water on both sides.
  • Fill the shoes with hot water (approx. 50°C) up to the top edge and leave to work for 5 minutes.
  • Remove the water from the shoes and take out the insoles. Rinse both the insoles and the inside of the shoes thoroughly with water.
  • Remove excess water.
  • Spray the insoles and the entire shoe with a disinfectant solution. Use Incidin Liquid and leave to work for 2 minutes.
  • Leave the shoes and insoles to drip dry and air dry.
  • Apply HOLÍK EMULSION to the dried leather.
  • Dry the shoes in a dryer at a temperature of 40–50 °C.
  • Finally, spray the dry shoes with HOLÍK IMPREGNATING SPRAY and leave to dry.

 

CARE AND STORAGE

  • Always treat clean and dry shoes.
  • Use HOLÍK BLACK SHOE CREAM on smooth leather (not fabric!).
  • We then recommend using HOLÍK IMPREGNATING SPRAY, which will enhance the water-repellent properties of membrane footwear.
  • After treatment, store your shoes in a dry, clean, and well-ventilated environment.
  • Do not use the cream on wet or damp leather.
  • We recommend this maintenance between professional cleaning and treatment.

 

WE RECOMMEND USING

  • Holík Emulsion
  • Holík Impregnation Spray
  • Holík Black Shoe Cream

Inquiry form

Please fill in this field.
Please fill in this field.
Please fill in the email in the correct format.
Please fill in this field.
Please fill in this field.
Please fill in this field.

Thank you for your interest. We will contact you as soon as possible.